boost_open_loop/boost_close_loop—MATLAB/Simulink

zxcv123 · 发表于 2019-6-5 18:04:48

毕业设计需要这一块谢谢楼主

chen1098951925 · 发表于 2019-6-7 22:06:43

学习学习

侧耳倾听 · 发表于 2019-11-24 13:39:48

谢谢分享

侧耳倾听 · 发表于 2019-11-24 18:52:07

下载看看先

13215601551 · 发表于 2019-12-12 10:11:22

boost_open_loop/boost_close_loop—MATLAB/Simulink

别了夏日 · 发表于 2019-12-13 15:37:31

下载学习

别了夏日 · 发表于 2019-12-13 15:37:56

下载学习交流

新能源江湖 · 发表于 2020-2-12 23:39:39

感谢分享，学习一下，谢谢

不加糖比较甜 · 发表于 2020-11-2 15:34:51

请问下载之后出现错误，
警告: You have required continuous-time simulation of a system containing switches or nonlinear elements.
The ode23tb variable-step stiff solver with relative tolerance set to 1e-4 generally gives best accuracy and simulation performance.
For some highly nonlinear models it may be necessary to set the "Solver reset method" parameter to "Robust".
See "Improving Simulation Performance" chapter in Simscape Power Systems documentation for additional information on how to select an appropriate integration method.
To ignore Simscape Power Systems (Specialized Technology) warnings, select "Disable Simscape Power Systems ST warnings" in the Powergui Preferences tab. [2 similar]
The block diagram 'boost_close_loop' uses bus signals or has signals/parameters that are associated with bus objects. However, the 'Mux blocks used to create bus signals' diagnostic is not configured to 'error'.
Suggested Actions
Run the 'Check Bus Usage' check in Upgrade Advisor and follow the recommendations

按照提示操作后依然错误是为什么呀

zxs2000 · 发表于 2021-3-20 13:47:33

感谢分享

		自动登录	找回密码
密码			立即注册